FE1/10(100)BaseT converter adopts telecom line (E1 or E1 transmitting network
such as PDH, SDH, microwave, etc) to extend Ethernet. It converts Ethernet
frame structure to E1 frame structure, and recovers E1 frame structure to
Ethernet frame structure at the other side, which enables Ethernet data to
transmit in telecom network based on E1. Because it is efficiently and
effectively used the spared bandwidth of telecom providers, it saves the
networking cost and improve the efficiency and can be used immediately.
1. Technology Characteristics of 1*E1/10(100)BaseT converter
Support Ethernet data transmitting transparently or according to timeslots in
E1 line; bandwidth ranges from 64Kbps-2048Kbps
Support Ethernet auto-sensed and full/half duplex function
Support MDI/MDI-X auto-sensed
Support to transmit of extra long frames regulated by IEEE 802.1Q; support
Ethernet switch with VLAN function
Support data filter at local side
Provide unbalanced 75 and balanced 120 E1 interfaces
2.Interface Parameters of 1*E1/10(100)BaseT converter
2.1 E1 Interface:
Support ITU-T G.703 , G.704
HDB3 line coding, comply indication output of route warn
Coding rate : 2048Kbps50ppm
75 physics interface use BNC standard coaxial connector, 120 physics
interface use RJ45 connector
2.2 Ethernet Interface:
Fully IEEE 802.3 (2000) compliant
Bit rate: 10Mbps or 100Mbps
Interface type: RJ45
3. General characteristics of 1*E1/10(100)BaseT converter
Power : 220V20% , -36 ~ -72V
Power Consumption : < 5W
Environment Temperature : 0-50
Size : 22017535mm or 48316045(mm)
Net Weight : 900g
4.Packing List of 1*E1/10(100)BaseT converter
FE1/10(100)BaseT Protocol Converter
One Power cord (Note : -48v no with power cord)
Two BNCs Coaxial Connector
Product Specification / Models
Brand Name : IDM
Supply Ablity : 3000pcs per month
As professional manufacturer of offset prepress equipment, Superluck Offset Prepress (OEM) Co., Ltd. is located in Shanghai of China. After more than thirty years' continuous development and progressively renovation, our offset prepress machines are known as 天胤 at home while famous Superluck in English name abroad. All staff in Superluck know well what ARTWORK is only because they always bear in mind with the idea of production of each machine to be an artwork.
As the focus is, professional it must be. Our prepress equipment includes eight items -Thermal CTP Plate Processor, Plate Baking Oven, PS Plate Processor, Plate Exposure, Plate Puncher and Bender, Film Processor, Spray Powder Extractor and Fountain Solution Filtration System. None of them can be taken as a special Superluck product, only because all of them are as good as one another.
Thermal CTP Plate Processor--- Superluck cooperate with CTP Platesetter brands like Kodak, Screen, Kylin, etc.
Plate Baking Oven--- To bake offset ps plates or CTP Plates in order to prolong the press run.
PS Plate Processor--- Quite economical model of processor to work on the processing of plates. Easy to operate and energy saving.
Plate Exposure--- Instant start and high effects of exposing, using imported rubber blanket and UV lamp.
Plate Puncher and Bender--- One unit of Superluck puncher can take charge of all the punching and bending tasks in the printing houses within many sets of printers. We produce relevant punchers for Heidelberg, KBA, Mitsubishi printer manufacturing factories locally.
Film Processor--- This film processor is used both in offset printing and medical films.
Spray Powder Extractor--- Superluck Extractor has two types- up draw and down draw, quite popular used for the extraction of spray powder in offset printing.
Fountain Solution Filtration System--- A new product which is designed to prolong the usage of the printing press fountain solution filtration.
Even though we have foreign sales department to deal with orders of worldwide customers, we will pay much attention to cooperate with more and more local agencies from different countries and areas. Welcome to Superluck and wish all come to us will enjoy SUPER LUCK.