106B+ 10A 6S Balance Battery Charger

Minimum Order
20pcs one paper carton
Product Description
tHigh power, high current, high-performance power conversion circuit. The iCharger series uses advanced Synchronous buck-boost DC/DC converter technology with an output conversion efficiency that can reach over 90%. This not only saves power and reduces heat build up but also makes the charger more compact and conveniently mobile.

tTwo input power choices: DC jack with auto-resetting fuse (maximum input current 6A) and butt-welded alligator clips with 4mm bullet connectors (25A).The output power can be adjusted to align with the available input power, thus preventting input current overload and protecting the DC source.

tThe iCharger series can be used with three types of Lithium batteries - LiPo, Lilo, LiFe - and has a fully integrated cell balancer.

tInternal temperature sensor and temperature controlled automatic cooling FAN controls the internal temperature and provides intelligent protection. When the internal temperature is over 60℃(140 oF), the output power is automatically reduced by 25%. If the temperature exceeds 65℃(149 oF) the charge cycle is stopped.

tConvenient set of 10 battery profile memories that can be saved and loaded by number.

t2x16 backlit LCD screen that provides rich information including active mode, current, voltage, total charge (mAh), charging time and temperature etc.

tVarious charging/discharging settings and cycles to meet a wide range of customer needs. For Lithium batteries: balance charging, normal charging, fast charging, storage, discharging, ext-discharging, charge/discharge cycling, and battery monitoring. For NiCd/NiMH batteries: charging-auto, charging-manual, discharging, charge/discharge cycling and forming charge. For Pb batteries: charging and discharging.

tUnique Lithium battery expanding discharge program. When you connect the external capacity resistance, you can use it as the maximum discharge power capacityu2014170W (@25V/7A).

tUnique Lithium battery Monitor program. When you use other equipment to charge or discharge a Lithium pack, you can use the iCharger to monitor the per-cell voltages, battery temperature and process time. If any individual cell appears over-charged or over-discharged or the pack is too hot or the process has gone on for too long, the iCharger will generate an alarm sound and the related information will blink.

tElectric motor test mode can be used to run-in electric motors, test motor parameters and performance, check tolerances etc.

tFoam-cut drive. In this mode, the charger acts as a convenient power supply for a hot wire foam cutter.

tBattery interior resistance measurement. The iCharger can not only measure the internal resistance of the battery pack, and also can measure the per-cell internal resistance (only available for lithium battery).

tPerfect protection. The iCharger has protection for reversed polarity (input or output), low input voltage, battery temperature, charging capacity and time overrun.

tSupport upgrading the hardware program by USB port. The iCharger also support the u201clogviewu201d software and can display, plot and analyze the charge and discharge data by it. (See detail information about logview in the following website: http://www.logview.info)

Product Feature
10A 250W 6S Balance Charger
Product Specification / Models
Input voltage range:t10.0 u2013 18.0VDC

Charge current range:t0.05 u2013 10.0A

Discharge current range:t0.05 u2013 7.0A

Maximum charge power capacity:t250W @ input voltage > 13.5V

Maximum discharge power capacity:t20W

Maximum extern discharge power capacity:t170W @ 25V/7A

Current drain for balancing:t<300mA

Balance accuracy:t<10mV

Lithium (LiPo/LiIo/LiFe) battery cell count:t1 u2013 6 series (In non-balance mode, expand LiFe to 8s)

NiCd/NiMH battery cell count:t1 u2013 17 series

Pb battery cell count:t1 u2013 12 series (2 u2013 24V)

Battery setup memories:t10

Intelligent temperature control:tYest

PC Connect:tUSB port


Dimensions (L X W X D):t134X83X25mm


Application / Models
First, RC plane, RC car, RC models

Second, charge Lilo, LiFe, LiPo, NiCd, NiMH batteries.
Junsi is one of leading providers in the global RC market with high power, high current balance charger/discharger and other related products. Now our main products are balance chargers with our own brand iCharger.

10s 30A 1000W--3010B
6S 30A 1000W--306B
8S 20A 350W--208B
6S 20A 300W--206B
10S 10A 300W--1010B+
6S 10A 250W--106B+

Other supplies related products

B610AC Lipo battery balance charger DC11-18V/AC100-240V 1-18Cell battery charger

B610AC Lipo battery balance charger DC11-18V/AC100-240V 1-18


China China
Manufacturer, Exporter, Agent, Distributor, Wholesaler/Retailer

Diesel generator/engine intelligent battery charger genset charger 12V 24V 6A 8A 10A YXCH2408

Payment:T/T,L/C,Western Union/ Money Gram
Delivery:within 3 days after receiving the payment
Origin:Fuan City,Fujian Province China
Packing:1pc/plastic bag,1 bag /box


China China
Manufacturer, Exporter

Shenzhen Junsi Electronic Co., Ltd.

China China
Contact Person: Sophie Xu
Telephone: 86-0755-88845688
Location: Guangdong, China
Business Type:Manufacturer, Exporter
Main Target Region:World Wide
Room 578 & 588, Building 9A, Anhua Industrial Zone, 8th Tairan Rd, Che Kung Temple,Futian
Main Product:
rc battery charger
View the Seller's Store

Products from the company