CM60 controller is a kind of intelligent, multi-purpose solar charge and discharge controller. The family use the fixed LCD display, with a very friendly interface; various control parameters can be flexibly set, fully meet your various application requirements. CM60 controller has following features:
Simple button operation
Intelligent PWM charge mode
Adjustable charge-discharge control parameters
Overload, Short Circuit Protection
Battery reverse-discharge protection
Battery reverse connection protection
Image of LCD graphic symbol
Automatic Identification System Voltage level
Automatic Temperature Compensation
Settable Operating mode of Load
Remote monitoring and control function (custom)
Battery Low Voltage Disconnection (LVD)
Accumulated function of charge and discharge Ampere hours
Maximum Voltage of solar panelt50Vt100V
Low Voltage Disconnectiont10.7V/21.4Vt42.8V
Low Voltage Reconnectiont12.6V/25.2Vt50.4V
No load losst<30mA
loop voltage dropt<200mV
Charging Modet PMW Mode
NotestModel suffix "Z" represent automatic identify system voltage level,"T" represent controller with remote monitoring
Get ready for tools and cables. Advising you to matching the right cables. Ensure that the current density <4A/mm2 that is conductive to reducing the line voltage drop. Recommendation: 30A with 10mm2 cables. Check whether the installation sites compliance with the relevant safety requirements. Please avoid the damp, dusty, there is a place flammable, explosive and corrosive gases use the controller to install.
Install the controller into a fixed vertical plane. See section 5 of the pore size and pore spacing. In order to ensure a good thermal control conditions, please set aside each 10cm below the controller space.
As shown on the right, connect the (1) Load, (2) Battery and (3) Solar Panel to the controller according to the order of (1) (2) (3). Pay attention to the load, battery, solar panel and controller of same polarity.
Put the external temperature sensor into the left of the controller (probe port). The temperature sensor should be placed at the similar space of the battery. (Otherwise, the controller will control the parameters of all wrong temperature compensation.)
If you have remote monitoring and control function, please insert one end of the included communication wire on the right of the controller (communication port), the other end to connect to the host computer.
Demolition: To prevent accidents, please order the demolition of solar panels, battery and load disconnect with controller.
Note:Battery polarity will not damage the controller, but you will have a load equipment security risks.
Installtion cable area
>3# AWG ( 25mm2 )
<90% , no condensation
Mounting hole spacing
90 mm 178 mm --5
YSmart Technology Co.,Ltd is an energetic and technological innovative company, dedicated in researching, manufacturing and marketing solar related proudcts,the factory islocated in Shenzhen China.We provide products including PWM solar charge controller, MPPT solar controllers and Grid Tie inverters.
The company presses the ISO9000 quality management system control product quantity strictly, the export production all passes the relevant national company check (CE), get high evaluation of the customer.
Since 2009, our service has been expanded to all over world.Our products are widely used in Spain,United Kingdom,France,India,Italy,Australia and many other countries and regions ,and have been extensively applied and highly appraised in a number of major projects.
"Quality first, customer orientation" is our purpose. YSmart Technology will be committed to provide the best service to you!
1A-80A PWM solar charge controllers.
10A-60A MPPT solar charge controllers.
6V,12V,24V,36V,48V Solar charge controllers.