ABS 3D printing filament
Can be used in RepRap , Makerbot ,Mendel ,Huxley , UP!printers , Ultimaker printer etc.
Product Specification / Models
Currently available standard colors: Green, Black, White, Purple, Blue, Orange, Yellow, Natural, RedStandard diameters available are:- 3 mm (actually 2.90 mm +/- 0.1 mm)- 1.75 mm (+/- 0.1 mm)Packing: 1kg/spool/polybag/box, 12 boxes/carton
- Produce process:Before produce extruding filament, we will dry ABS and PLA for a enough time (3-5 hours)Mix with colors master batch or colors powder, all which certified with RoHSAdjust temperature and dragging rate, make filament diameter range at 1.6-1.8mm/2.8-3.0mm, rouundness u00b10.05mm, each spool net weight 1kg u00b10.02kgWe put all filament spool in shelf, different kind in different shelf, all categories arranged orderly- About waste and recycle:Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after producedWe haven't produced with scrap outlet, rework and recycle material, or dispose, but for quality assurance purpose- Packaging:We put each filament/spool on seal PE bag with desiccant, then smaller carton, then out big boxWe also have vacuum heated bag to replace of PE bag, make better avoid moisture- Production quality control:We have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range acceptableKeep each record filament samples sent to customers, build a tracking able documentWhen the filament put on shelf longer than half a year, we will dry the filament again
The spread 3D SeriesPrinter provides a true "Out of the Box 3D Printing Experience" as the 3D Printer comes fully-assembled, with easy-to-install software for PC.
The filaments we provide are, like our 3D printers, all of exceptional quality to ensure you will end up with a beautifully printed design. We offer a wide scope of colors that all have a wire diameter of 1.75mm, 2.0mm and 3.0mm. This means that you can use our filament in spread series 3D printers and other 3D printers currently on the market. Currently we are selling ABS plastiic.