battery pad & blanket heaters

Origin
China
Minimum Order
N/A
Inspection
N/A
Packing
N/A
Delivery
N/A
Payment
N/A
Product Description
Product Features:

Silicone covered for oil and acid resistance

Universal applications

Thermostatically controlled

Use as an oil or transmission pan heater

Easy to install, as it requires little mechanical ability

Wide range of sizes in both 120 volt and 240 volt (optional)

Extends the life of the battery





Product Specifications:

Product Name: Battery Warmer Pad

Brand: Honeywon

Size: 2inch X 5inch X 1.5mm or to be customized

Voltage: 120v or 240v or to be customized

Wattage: 50w or to be customized





Technical Parameters:

1 )Maximum temperature resistance of insulator:300C

2 )Maximum operation temperature: 250C

3 )Insulation Resistance:≥500 MΩ/DC 1000V

4 )Breakdown Voltage:≥ AC1500v/5S

5 )Capacity Tolerance:u00b15%

6 )Temperature range:-60C~250C for continuous heated,Heating element:both etched foil and wire-wound element available.

7 ) Dimension:Maximum 1.2m x Xm, Minimum:1.5mm x 1.5mm, standard thickness:1.5mm (thinnest:0.8mm,thickest:4.5mm),

Lead wire length:standard 130mm.





Product Description

A battery can lose 60% of its starting power when the temperature reaches 0-degrees F. Cold engines require more power

from the battery at these temperatures. These two factors make it imperative that you use a battery pad heater to extend

the life of your battery, and assist in your cold weather starting requirements. Fully charged batteries have a significant

drop in power at colder temperatures. The battery wrap allows you to have full cranking power regardless of the cold.

The battery heater should not be used when the temperature is above freezing.





Installation Instructions:

1. Loosen or remove battery,hold down bolts

2. Wash off sides of battery-wipe dry

3. Wrap blanket around battery, pull tight at corners, and tie with tapes provided

4. Tighten battery hold-downs

5. Run cord to front grille, taping where necessary.





Warning:

Keep printed side out.Do not overlap and energize only when applied to battery.

Do not operate when outside air temperature is above freezing (32F/0C).  
Product Specification / Models
Product Features:

Silicone covered for oil and acid resistance

Universal applications

Thermostatically controlled

Use as an oil or transmission pan heater

Easy to install, as it requires little mechanical ability

Wide range of sizes in both 120 volt and 240 volt (optional)

Extends the life of the battery





Product Specifications:

Product Name: Battery Warmer Pad

Brand: Honeywon

Size: 2inch X 5inch X 1.5mm or to be customized

Voltage: 120v or 240v or to be customized

Wattage: 50w or to be customized





Technical Parameters:

1 )Maximum temperature resistance of insulator:300C

2 )Maximum operation temperature: 250C

3 )Insulation Resistance:≥500 MΩ/DC 1000V

4 )Breakdown Voltage:≥ AC1500v/5S

5 )Capacity Tolerance:u00b15%

6 )Temperature range:-60C~250C for continuous heated,Heating element:both etched foil and wire-wound element available.

7 ) Dimension:Maximum 1.2m x Xm, Minimum:1.5mm x 1.5mm, standard thickness:1.5mm (thinnest:0.8mm,thickest:4.5mm),

Lead wire length:standard 130mm.





Product Description

A battery can lose 60% of its starting power when the temperature reaches 0-degrees F. Cold engines require more power

from the battery at these temperatures. These two factors make it imperative that you use a battery pad heater to extend

the life of your battery, and assist in your cold weather starting requirements. Fully charged batteries have a significant

drop in power at colder temperatures. The battery wrap allows you to have full cranking power regardless of the cold.

The battery heater should not be used when the temperature is above freezing.





Installation Instructions:

1. Loosen or remove battery,hold down bolts

2. Wash off sides of battery-wipe dry

3. Wrap blanket around battery, pull tight at corners, and tie with tapes provided

4. Tighten battery hold-downs

5. Run cord to front grille, taping where necessary.





Warning:

Keep printed side out.Do not overlap and energize only when applied to battery.

Do not operate when outside air temperature is above freezing (32F/0C).  
Products Features:

An Engine Pad Heater is an electric heater that heats the engine of a car to give quicker starts in cold weather. It is thin, flexible
heating pads and are attached to the outside of an oil pan

Other supplies related products

silicone blanket&sheet&pad&band heater provided by professional manufacture

Payment:customized
Delivery:customized
Origin:Dongguan Guangdong
Packing:customized
silicone heater

Dongguan Cuanze Electronics&Technology Co,. Ltd.

China China
Manufacturer
86-769-89063267

silicone pad&sheet&blanket heater for 3D printer using

Payment:customized
Delivery:customized
Origin:Dongguan Guangdong
Packing:customized
silicone heater

Dongguan Cuanze Electronics&Technology Co,. Ltd.

China China
Manufacturer
86-769-89063267

Honeywon Heater Product Co., Ltd

China China
Contact Person: Mark Zhang
Telephone: 86-752-8481-591
Location: Guangdong, China
Business Type:Manufacturer, Exporter
Main Target Region:China
Address:
Yuanlingxinyuan,Xiajiao,Huicheng District,Huizhou City
Main Product:
battery heater
View the Seller's Store

Products from the company