bft mitto 2 gate garage compatible remote control replacement bft 433.92mhz transmitter

Origin
N/A
Minimum Order
N/A
Inspection
N/A
Packing
N/A
Delivery
N/A
Payment
N/A

How to Program

 

The remote control is the same function as your original remote.it should programming with original receiver according to your original Manual when you get it.

 

The following process will only work if your control panel has been enabled for remote programming by the installer. If the following process does not work you will need the assistance of an approved BFT installer You must be at the control panel. (It does not need to be open)

You will need one existing, functional, transmitter already coded on the system and any new/replacement transmitters readily to hand. The following sequence must be followed sequentially in rapid succession; any pause in the process will cause the system to time out. 

 

1. Momentarily press the hidden button on the back of the transmitter already stored on system.

If it has no hidden button use the top two front buttons together instead.

 

2. Momentarily press the chanel - 1 button on the front of transmitter already stored on system.

 

3. Momentarily press and hold few seconds two buttons of the new transmitter. (4 seconds. Exact buttons holding time until red light turn on)

 

4. Press the chanel - 1 button on front of the new transmitter, momentarily.

 

Programming is now complete. Same way programm chanel - 2 button. Leave 20 Seconds before attempting to use a transmitter for the board to reset.

 

 

Programming from receiver

 

BFT CLONIX 2E RECEIVER Programming. If your receiver model is different, please read your receiver user manual.

Before start programm please verify dip switches. 1-ON, 2-OFF (BFT CLONIX 2E RECEIVER) Very important!

 

1. Press push button SW1 (chanel 1) Led blinking with 1 second pause.

 

2. Momentarily press and hold few seconds two buttons of the new transmitter. (4 seconds. Exact buttons holding time until red light turn on) Led stay on.

 

3. Press the chanel - 1 button on front of the new transmitter, momentarily. Led constantly blinking. After learning Led blinking with 1 second pause.

 

Programming is now complete. Same way programm chanel - 2 button. Leave 20 Seconds before attempting to use a transmitter for the board to reset.

 

 

The remote control is the same function as your original remote.it should programming with original receiver according to your original Manual

Programming from receiver

We are a wireless remote control company. We have worked in this line for 8 years. We have 7 years' European market export experience, and we know very well about the market.

Our 8 engineers can accept OEM & ODM, and 5 salespersons know the product technology very well so we are easy to communicate with our business. Please contact us freely if you are interested in our business.

Other supplies related products

Duplicate Remote control relay transmitter module with 315 /433.92MHz

Payment:T/T,paypal,western union
Delivery:N/A
Origin:china
Packing:N/A
remote control

Shenzhen (Chendazhike) Electronic Technology Co.,Ltd

China China
Manufacturer
86-0755-26784316

FSK Remote control relay transmitter module with 315 /433.92MHz

Payment:T/T,paypal,western union
Delivery:3-5 DAY
Origin:china
Packing:Neutral packing,100sets in our carton
FSK remote control

Shenzhen (Chendazhike) Electronic Technology Co.,Ltd

China China
Manufacturer
86-0755-26784316