Used for previously primed and filled metal surface of the carbody and damaged parts of the carbody and other automobile parts. Available in two modifications:
1. BAITEK for air drying
2. BAITEK + for stoving
Makes a highgloss weather-resistant finish coat with good mechanical characteristics and light resistance of the color and gloss.
Product Specification / Models
Baitek + for stoving - 30 min at +130-135u00b0C.
Baitek for air drying - 24 h hard dry
one coat 1 kg/11-20 m2 depending on the color
0,8 kg, 2,4 kg, 16 kg, 25 kg, 40 kg.
Application / Models
Before applying the enamel clean the surface must be cleaned from dirt, rust, dust, cinder, old flaking coating etc. then degreased and dried.
Stir well and dilute with solvent and paint thinner # 50, 647 but no more than 25 % from the paint bulk.
Before use also add hardener - 80-120 g/kg of paint. Highly recommended to check the hardener with some amount of paint before starting the application.
Apply with a spray as 2 coats. Allow 5-7 min before next coat.
Technostar Color Management- a successful manufacturer of paint and all-purpose coatings from Russia. We perform entire manufacturing cycle: from semi-finished (alkyd) lacquer to finished products and packages.