Ejection Pins Pipe Fitting Mould With Cold Runner System
1. The part name: pipe fitting (plastic injection mold)
2. Plastic material: PA66+GF50
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
4. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
5. Cavity material: H13 HRC48-52
6. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
7. Gate type: Sub-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.
This product is made of PA66+GF50 plastic material and it is one of the components of the reputable brand pipe fitting. The construction is complicated and there are hydraulic cylinder, hydraulic motors, gear, fan gear, gear-rack in the mold, also have Internal and external thread in the product, so it has a very high technical requirement for the mould design. The mould is a cold runner mould with water cooling system and the part can be molded by both automatically and manually.
This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE-B3.
This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Product Specification / Models
pipe fitting (plastic injection mold)
3.mould base material
H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc
1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
Sub-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.
10. mould base standard
LKM Local standard, DME,HASCO,Customize according to customers' requirements
12. standard of mold accessories
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Auto CAD ,UG, Pro-E ,Solid Works,Moldflow,etc.
14. File Formats
Auto CAD (DWG), DXF, JPG or JEPG, PDF, Pro-E or Pro/Engineer(DRW,PRT), IGES, STEP,XTL,UG parts etc.
15. injection molding machine
T/T, To be negotiated
Wooden case or Wooden box with steel frame
19. delivery time(day)
35 T1 according to customers' requirements
20. OEM or ODM
21. mould logo
Based on customer requires
22. after-sales service
one year is warranties
Application / Models
Molding the plastic product by plastic injection machine
We specialize in Mold Making & Injection molding that has been defined since 2003 , well equipped with precision CNC, Mirror-EDM, Slow wire cutting, Injection Machine and the most advanced CMM etc. Shiny is able to take an idea from its conception to a completely finished product.
All of our mold standard meets DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive etc.
Our supplier include DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS,MOLD-MASTER, MERKLE, parker,HPS,LKM, EUCHNER,RJG,cilpres,NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER,AISI standard, DAIDO JIS standard, PUNCH etc.
Complete in-house Mold making, Mold testing and Injection Molding.
Shiny supply finished parts from 50 pieces upwards to millions of parts as per the customer’s request.
With a group of senior technicians, we are constantly devoted to improving quality and updating technology.
Shiny mold adopts a TQM system focused on customer service in its manufacture, actively advocates the standardization of ISO9001 and constantly improves technical process so as to strictly supervise and control the whole process of designing and manufacturing, which has further ensured the quality of the products.
Sticking to "Customer First, Science & Technology First" , the company has served its customers with the principle of constant innovation and improvement ever since its establishment. It has developed a system of continuously learning from advanced foreign technology and technical process for mold production and has made utmost efforts in improving the quality, reducing the delivery time and offering best after-sale service.
Believe that Shiny (HK) industrial Technology Limited. is your most satisfactory choice！