TH series of low-concentration slag separator is the principle of centrifugal separation of eddy current. The slurry of the pressure can be entered from the inlet of the cutting edge in the direction of the tangential direction, and the eddy motion of high speed in the cone is separated. The vortex in the axial direction of the separation tube is led to the end of the cone, and the heavy impurities in the slurry are thrown into the wall of the wall and discharged from the lower end. The slurry gathers to the center of the separation tube and forms the main slurry flow, which is sent out from the upper part of the slurry to the next process.
Technical data of slag eliminator
Single pass amount: 400L/min
Concentration: 0.30 ~ 1.0%
Inlet pressure: 0.25 ~ 0.35 Mpa
Rated entry and exit pressure differential: 0.15mpa
Minimum good pulp pressure: 0.03 Mpa