HeNan Creat Lead Industrial Ceramics Technology Co.,Ltd
Shanghai DaDa Techology Trading Co.,Ltd
We produce and supply high quality Cordierite / Mullite kiln furniture. Our products range from Plain batt, Extruded batt, Cordierite / Mullite brick, Extruded Tubes, Fittings and Secondary Kiln Furniture.
Plain Batt is the most common type of primary kiln furniture, usually produced by semi-dry pressing, but can also be made by pressure-casting. Extruded batts can be split into ten sub-categories as follows: Extra Large Batt, Extra Thin Batt, Plain Batt, Perforated Batt, Grooved Batt,Trapezoid Batt, Recessed Batt, Full Disc, Half Disc and Special Batt.
Extruded batt have holes running the length of the cross section (Trend Code: T02) and are manufactured using high pressure vacuum extrusion, before being cut and surface-ground to guarantee the highest standard of flatness and dimensional accuracy. Our extruded batts are now amongst the leading products in Asia, and are of a better quality than similar products made in China. They are used mainly in the sanitary ware and glass panel industries, but can be found in a number of applications including the biscuit and glost firing of tableware.
Plain Supports are classed as Primary Kiln Furniture and are used as supports for pressed and extruded batts. These are normally manufactured by semi-dry pressing but can also be made by plastic-pressing or casting. Plain supports can be split into six sub-categories as follows: Cuboid Support, I-Shape Support, Adjustable Support, Support with Bases, Support Block and Special Support.
Secondary Kiln Furniture refers to a wide range of products used in the tableware industry to support and protect ceramic products, usually coming into direct contact with the ware. There are several types of tableware, with thousands of shapes for numerous applications. This means that secondary kiln furniture is the most complex of all our product ranges, with the biggest variation in shape, size and material, making it the most difficult to manufacture. Choosing suitable secondary kiln furniture can help greatly increase the yield, increase kiln load, reduce fuel consumption, reduce labour and thereby lead to significant cost savings.
Saggars and Crucibles although they are quite different products, have been grouped together as they are both used as containers. Saggars are usually larger and used to protect or support products during firing, for example in the glost or biscuit firing of tableware, or for powder calcination, etc. These products can be made by semi-dry pressing, plastic pressing and casting. Crucibles are smaller containers used for the melting of materials, e.g. minerals and glass. Saggars and crucibles can be split into five sub-categories as follows: Round Saggars, Square Saggars, Special Saggars, Round Crucibles and Special Crucibles.
Kiln Accessories are refractory products used in the kiln structure (roof and wall) or on the kiln car base. Thanks to Beijing Trend's years of research and cooperation with many international kiln companies, cordierite-mullite kiln furniture materials have been developed for use in the kiln structure to help solve the problem of kiln dirt from insulating bricks and ceramic fibre linings. This significantly increases production yields during the firing of ceramic products, especially for intermittent kilns (Shuttle kilns), where linings are subject to repeated thermal cycling. Cordierite-mullite imparts good thermal shock resistance and can improve the longevity of insulating firebrick and ceramic fibre linings.
Silicon carbide are SiC Products and Special Kiln Furniture. SiC Products are manufactured and strictly inspected to meet national stander and client's demand, it is more stronger and more fireproof than others. With strictly quality control and stable performance, it enjoy good reputation on market.
We produces various types of Insulating Fire Brick (IFB) for use in applications from 2,000u00b0F (1,093u00b0C) to 3,200u00b0F (1,760u00b0C). Each type is formulated to
1. Low thermal conductivity.
2. High strength and resistance to corrosion.
3. Low heat capacity.
4. Low shrinkage after heavy firing.
5. High insulation.
6. High refractoriness.
7. Low density.
8. Good thermal shock resistance under high temperature.
9. Thermal insulation energy-saving effect is good.
1. Steel furnaces
2. Iron making furnaces
3. Glass kiln
4. Ceramic tunnel kiln
5. Cement kiln
Application / Models
1. Steel furnaces
2. Iron making furnaces
3. Glass kiln
4. Ceramic tunnel kiln
Welcome to DaDa Technology.
We offer various high quality sanitary ware, Toilet Water Closet, Urinal, Squatting pan, Pedestal Basin, Mop Tub, Laundry Sink, Cabinet basin, Water faucet water tap, Copper shower head / Rain Shower, Multifunction Copper Towel rack, Bathroom cabinet, Stainless steel floor drain, Shower tube & Drain tube, Angle valve Shower Arm Diverter and Other bathroom & toilet fittings.
Ceramic sanitary wares are the fixtures which comprise wash basins, shower plates, toilet bowls, bath tubs, and others. The basic raw materials which are used to form ceramics are naturally occurring components, such as kaolin, feldspar, ball clay, and quartz. Sanitary ware products are cost-efficient and easy to clean. Moreover, the characteristics of ceramics, such as corrosion resistance, abrasion resistance, and glossy surface prevent it to be replaced by alternatives such as steel and fiber. Sanitary wares have requirement in residential, commercial, and public areas. Hence, growth in the real estate industry, increasing population in the developing nations, and increasing standard of living of the people is projected to drive the ceramic sanitary ware market.
SANITARY WARE PRODUCTION: TRADITION AND INNOVATION
The basic ingredients for making ceramics have always been naturally occurring raw materials: Kaolinite, clay, feldspar and quartz sand form the basis for this extremely durable and hard material. The individual components of this malleable material are combined, homogenised and cleaned as part of a unique and very protracted process at DADATEC. The resulting slurry – the pourable starting material for ceramics – is poured into pre-prepared plaster moulds or shaped using a special pouring process developed at DADATEC.
The formability and pourability of the material allows the creation of a wide variety of sanitary ware products, but nevertheless always poses a manufacturing challenge, especially when creating objects with complex geometries. Dried and glazed blanks are then baked in a kiln at temperatures up to 1240 degree. Such extreme kiln temperatures ensure the hardness and durability of our high-quality DADATEC products.
Ceramics, through their smooth, easy-to-clean surface, fulfil the highest hygiene standards – chemical acids, strong cleaning fluids or hydrochloric compounds hardly affect the material. Due its light fastness, versatility and pleasant appearance, ceramic is the most popular material used to manufacture high-quality sanitary fittings.
Sanitary ware and Bathroom Fittings:
Toilet Water Closet,Urinal,Squatting pan,Pedestal Basin,Mop Tub,Laundry Sink,Cabinet basin,Water faucet tap,Copper rain shower head,Multifunction Copper Towel rack,Bathroom cabinet,Stainless steel floor drain,Shower tube,Drain tube,Angle valve Shower Arm Diverter,bathroom toilet fittings.
Refractory Kiln Furnitures:
Cordierite Mullite Plain Batt
Cordierite Mullite Extruded batt
Cordierite Mullite Brick
Silicon carbide tube
Silicon carbide slab