Multi-Disk Screw Press( Hereinafter referred as MDS ) belongs to the screw press, it's clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant construction. MDS using screw and the moving rings to clean itself as clog-free structure, and controlled by the PLC automatically, it's a new technology that can replace the traditional filter press like belt press and frame press, the screw speed is very low, so it cost low power and water consumption in contrast to the centrifuge, it is a cutting edge sludge dewatering machine.
Layers of the spacers, which are Fixed and Moving Rings, are secured in place by a tie rod. The inner diameters of the Moving Rings are slightly smaller than the outer diameter of the screw and their rings. Mobilized by the screw, it continuously cleans the sludge out of the gaps, therefore, preventing clogging.
The initial section of dewatering drum is the Thickening Zone, where the solid-liquid separating process takes place and where the filtrate will also be discharged. The pitch of the screw and the gaps between the rings decrease at the end of dewatering drum, hence increasing its internal pressure. At the end, the End Plate further increases the pressure, so as to discharge dry sludge cake.u00a0
Application / Models
1)Municipal water and wastewater treatment plants
2) Agricultural/fishery community wastewater treatment plants
3) Industrial waste treatment plants
4) Food/beverage production plants
5) Dairy farming/Meat processing plants
6) Chemicals manufacturing plants
7) Machinery manufacturing/Metal processing plants
8) Laundry wastewater
9) Other (paper manufacturing, building material manufacturing, oilfield associated water accompanied with crude oil mining, etc. )
3.Fully Automatic Control
4.Save Running Cost
5.Without secondary pollution
6.Contactless, Wear Free Structure Design
7.Decrease Capital Investment
8.High Resistance to Oily Sludge
Zhejiang Lifeng Environmental Equipment Co., Ltd.?We are a plant specializing in the manufacture and export of sludge screw press.
Lifeng has focused on design, engineering, supply and installation of domestic sludge dewatering and waste water treatment. Our products line include Multi-disk screw (MDS) dewatering series. Triangle rotor plate (TRP) solid liquid separator, Magflow particulate removal system and other wastewater treatment equipment. You may also visit our online company introduction at Http://www.dewater123.com