Spray booth is a closed environment for vehicles painting in a body shop with pressure control. In order to provide an ideal working condition, this environment should be equipped with one or several groups of ventilation and burners to heat the air to ensure the spray booth has suitable temperature, air flow and illumination.
ALF spray booth is designed with several ventilation systems to guarantee the best painting conditions. All the filter system and air exhaust underneath create a vertical efficient air flow that is distributed evenly inside the booth and allows overspray to be removed immediately at all space around the vehicle.
Air recirculation on bake cycle
100% of the air handled by the fan is put into ALF spray booth during the bake cycle and only 15%-20% is expelled outside from there, while the balance 80%-85% is recovered and filled up with fresh air by means of the changeover damper.
Even temperature distribution in all points around the vehicle being painted rapid reaching of bake temperature and consequent reduction of bake time, high energy saving due to recovery of most of the heat produced for the bake cycle.
The illumination is provided by four-tube, 36-watt light fixtures in the angled ceiling panels and side walls. They are sealed with 0.5mm clear and tempered safety glass. Correct lighting in ALF spray booth should be required for the good conditions for the painter.
The filtering is composed of high-efficiency heat, dust, paint resistant micro filters. The large surface cover and their progressive density guarantee high dust retention capacity and low resistance to the air passage. The long life of these filters considerably reduces frequency of replacement, contributing to reduction in running costs.
Product Specification / Models
- inside (D*W*H)t6900*3900*2650 mm
- outside (D*W*H)t 7050*5300*3250mm
- 3-fold door (W*H)t3000*2600 mm
- service door (W*H)t650*2000 mm
- air intake motor powert7.5 kW
- air exhaust motor powert7.5 kW
- burner max. heating capacityt200000 kcal/h
- max. air capacity in paint phaset24000 mu00b3/h
- max. oil consumptiont17 L/cycle
- temperature in bake phaset60-80u00b0
Total powert16.6 kW
Motor voltage and phaset3ph.*380-400V/50Hz
Light powert32*36 + 16*20 = 1472 W
Entry ramp lengtht2000 mm
Floor load capacityt500 kg/wheel print (0.2*0.2m)
Wall panel thicknesst50 mm
Application / Models
wood furniture spray painting equipment, Auto care equipment, industrial coating equipment, professional production and overseas sale .
Zouping ollie feng environmental protection equipment co., LTD is a manufacturer specializing in wooden furniture spray painting equipment, industrial coating equipment, professional production and sales enterprises.Through the use of international advanced design standards, advanced manufacturing technology, to wood furniture manufacturing industry to provide high-quality spray painting equipment, the corresponding supporting equipment and comprehensive technical services.