As water in the collector is heated, it becomes lighter and naturally rises into the
tank above. Then the hot flows into the left tanks. Meanwhile, cooler water in
the right tank flows downwards into the collector, thus causes circulation
throughout the system. Because the cool water is forever below the hot
water, so the water in the left tank is always hot. But other
non-pressure solar water heaters are differrent. When the cold water is
put into the collector, it flows into the hot water and mixes with hot
water directly. So the tempreture falls down quickly. The electric
heater is in the left tank. When it is needed, only the water in this tank
is heated, so it will be heated very quickly and the electricty is saved.
1. The higher tank is the cold water tank. There is an adding water controller
in it, so the water can be added automatically. Because the controller is in
the cold water, it has long life. The separate water tank must supply water
2. The cold water tank combines with the hot water tank perfectly because of
scientific design, so it can supply water stablly, fix easily and at low cost and
has a beautiful appearance. The separate tank canu2019t do those and is very
3. The water is clear, can be used in winter because of the insulation layer
and can be used for the solar water tank and daily life. The sepatate tank is
dirty and canu2019t be used in winter.
4. It is very useful for the places whithout running water or the water pressure
is not stable
5. The lower tank adopts unique dual-core technology, assuring hot water all
the year round
6. Temperature preservation is equipped with standard electric water heater .
The electric heater is in the left tank. When it is needed, only the water in
this tank is heated, so it will be heated very quickly and the electricty is
7. It can add water automatically
8. Scientifically designed bracket can hold the tank firmly
9. High quality vavuum tubes
10. Simple structure, easy plug-in installation
11. Guaranty: 3 years for tank, 15 years for collector and lifetime service
12. Colors according to customersu2019 needs
Product Specification / Models
1) Bracket: thicken galvanized anticorrosive steel. Stainless steel.
2) Vacuum tube: 58mm x 1.8m (18pcs - 36pcs).According to customersu2019 needs.
3) Inner tank: SUS304-2B food grade stainless steel
4) Outer tank: Special antiseptic white porcelain stainless plate. Stainless steel.
5) Capacity: 120L - 280L(according to cutomers' needs)
6) Insulating layer thickness: ≥65mm Freon-free polyurethane
7) Pressure: 0Pa
Specially designed for areas without running water
Add water automatically
Have the better insulation
Use more hot water
Save more energy
Your satisfaction is our pursue
Babysun ---You and us, we can build a green world.
Babysun, the sun??? baby, offer you best thermal solution, and pay back with a pure, clean, green and friendly environment.