Walk-Through Metal Detector ThruScan s9

Minimum Order

International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS

Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)

 Multi-Zone - 9 Real Matrix Detection Zones (Up/Middle/Down and Left/Middle/Right)

Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand

Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities.

Can detect test objects both individually and in combination.

Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators

Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

No Interference between Zones and No False Alarms

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 Standard preset International Security Program

Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

Human Health friendly Very Low Frequency VLF technology, No effect on Pace Makers, Pregnant and Magnetic Media

Green/Red bi-colour traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels

10 Adjustable audio tones with 10 volume levels (enabling Mute Operation)

IP 44 (Optional IP 65) Protection Level (EN 60529)

Five Digit Incoming/ Outgoing traffic counter (can be made invisible)

Alarms counted separately

Interference free Operation from other Electronic Devices and Does Not react other Electronic Equipment. Necessary u001ealtering precautions have been taken.

Four-digit changeable digital Pin Code + Mechanical Lock

Automatic Failure Display Function with continuous self-checking of key parameters (BITE - Built In test Equipment)

Reloading the factory default settings by one-touch button

Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)

4 Menu Languages, Standard menu in English, German, Spanish and Turkish

STANDARD Built-in Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains

No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

Manufactured for 24/7 Continuous Operation

74 cm Net Passage Width and 200 cm Net Passage Height

Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects

Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings do not change when there is an electricity cut-off

No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic device 

All Electronic Units (electronic unit, power supply, battery, adapter etc...) are inside the Equipment. No external units.

Strong plastic footers for sturdy placement and durable use.

Resistant to Vibration & Impact

Optional -SCADA Software-Controlled remote data communication and Networking of Multiple Metal Detectors; Software to Change settings by PC (Digital output for Network Connection) 

Manufactured using the latest technology and advanced components

Technical Features:

Ambient Temperature: -20°C to +70°

Operating voltage: 70VAC – 270VAC / 50Hz - 60Hz

Power: 10W Stand By- 20W (Alarm)

Net Passage: 740x680x2000 mm

External: 850x680x2200 mm


Established in 1978, we are one of the main manufacturers and exporters of high-tech electronic& electro-mechanic products namely ThruScan Metal Detectors & Tru-VEND Vending Machines and expanding our market share rapidly in Global Markets and export ~65% of our productions. Our production in conformity with CE norms, all procedures being held by ISO 9001:2008 Quality Management System, technical support and prompt solutions by our dense R&D team, qualified workers and an efficient management we do operate at our 3 factories of a closed area of 17.000 sqm closed factory area in Turkey's second biggest Industrial Zone in Izmir.

Other supplies related products

33zone Walk Through Metal Detector Door Frame Metal Detector for hardware factory body scanner

Delivery:3working days
33Zone Metal Detectors, Walk Through Metal Detector, Door Frame Metal Detector

Shenzhen KimGuard Technology Co., LTD

China China
Manufacturer, Importer, Wholesaler/Retailer
+86 134 1431 1774

33 Detection Zones Walk Through Metal Detector,Door Frame Metal Detector PD6500i

Payment:TT,Western Union
Packing:carton box
walk through metal detector

Shenzhen Dongyihaoli Technology Co. Ltd.

China China
Manufacturer, Exporter

Elektral Elektromekanik San. ve Tic. A.S.

Turkey Turkey
Contact Person: Erdem DINCSOY PhD. EE
Telephone: +90 232 376 73 00
Location: Izmir, Turkey
Fax:+90 232 376 70 30
Business Type:Manufacturer, Exporter
Main Target Region:World Wide
Izmir Ataturk Industrial Zone, M.K. Ataturk Blv. 23
Main Product:
Metal Detectors, Vending Machines
View the Seller's Store

Products from the company